A SPECIAL DESIGN FOR OZONATED WATER
GC Valves now offers a limited line of electrically actuated ball valves that are specifically designed for ozone applications. 1/2" & 3/4" NPT versions are stocked at our Charlotte manufacturing facility. This upgrade to our B20 Series features stainless steel and soft seals that resist attack by ozone.
DO YOU OFFER AUTOMATIC CONDENSATE DRAIN KITS FOR PNEUMATIC SYSTEMS?
Yes, our H2O-GO products are intended to automatically drain condensate from air systems. The automatic control is a DIN timer (T4510) which can be adjusted for as much as 45 minutes off and up to 10 seconds on. A normally closed solenoid valve with DIN housing is energized by the timer. A 6 foot cord with 110ac plug (C4010-GRN1) can provide power from a standard wall outlet. And a combination ball valve/strainer protects the valve from entrained solids and isolates the valve for maintenance.
H2O-GO Compressor Drain Kit - Typical part numbers:
1/4" NPT -- K4510S30Y02BD5
3/8" NPT -- K4510S30Y02CD5
1/2" NPT -- K4510S30Y02DG4
Larger pipe sizes also available. Contact your distributor or the region office for more information.
We also sell individual DIN Accessories:
C4010 (DIN Connector)
C4010-GRN1 (DIN Connector with 6’ Cord & Plug)
T4510 (DIN Timer)
DO YOU HAVE A RESOURCE THAT LISTS COMMON APPLICATIONS AND THE VALVES THAT ARE USED IN THEM?
Yes, we do. Check out gcvalves.com/appguide.htm on our website. It lists the most common industrial and commercial solenoid valve applications – and provides part numbers for most pipe sizes. Newest additions to the list are NSF Valves (for potable water equipment) and valves with Kalrez seals (for aggressive chemicals).
SOLENOID VALVES FOR ANY WATER APPLICATION
If we haven’t already developed a solenoid valve for your application, chances are good we can. Here’s some of what we do:
- Water, Potable Water, “Zero Lead” & NSF 61
- RO Water, DI Water, Ozonated Water
- Chilled Water
- Hot Water
- Zero Differential
- Steam including DI Steam
- Anti-Water Hammer from 3/8” to 2” NPT
- Selecting and Diverting Manifolds
- High Pressure to 2200 psi
- HiFlow 3-way Operation with ¾” orifice
- 3” to 6” Flanged Solenoid Valves.
Body Materials include Brass, Stainless Steel, Noryl, Nylon and other man-made materials.
FAQ: DO YOU STILL MANUFACTURE COMBUSTION VALVES?
GC Valves manufactures some of the most popular pilot valves for oil and natural gas burners, many dating back to our days as part of ITT-General Controls.
Our S31 and S30 direct acting valves cover a wide range of
fuel oil and natural gas flows and pressures.
The S40 piloted piston offers a unique combination of high flow 3/8” orifice and a 300 psi pressure differential rating.
You can see a list of common products for combustion
applications from 1/8” to 2” NPT our website at gcvalves.com/agCombustion.htm.
SOLENOID VALVES FOR POOL WATER, WATER PARKS AND WATER EFECTS
A typical S21 Series water valvehardened for commercial pool water application:
DO YOUR SOLENOID VALVES MEET THE REQUIREMENTS OF THE 2014 U.S. SAFE DRINKING WATER ACT?
Yes. GC Valves manufactures stainless steel solenoid valves from 1/8” to 2” NPT that do not contain lead.
We also manufacture solenoid valves with Noryl bodies from 3/8” to 1” that do not contain lead. Many of these
valves also carry NSF 61 certification for “Drinking Water System Components”.
"Lead free" legislation in the U.S. relates to any pipe, pipe or plumbing fitting, or fixture intended to convey or dispense water for drinking or cooking. For these products, "lead free" means not more than a weighted average lead content of 0.25 percent.
California and Vermont had already enacted "lead
free" legislation. The U.S. Safe Drinking Water Act made this a national requirement in January 2014.
THE FULL RANGE OF SOLENOID VALVES FOR STEAM SERVICE
GC Valves manufactures a complete range of valves
from 1/8” NPT to 2” NPT with constructions for 50, 100 or 150 psi maximum steam pressures. Most are available in stainless steel or brass bodies with EPR or Teflon seals. We also offer solenoid valve designs intended for water, hot water, and most commercial and industrial line fluids. Details available from your distributor or on-line at gcvalves.com.
CRYOGENIC SOLENOID VALVE DESIGNS
Solenoid valves for Cryogenic applications require unique construction, special coatings, and metallic housings. The operating parameters of these valves are not included in our general purpose catalog. When you contact the Region Office with line fluid, pressure/temperature, voltage and other requirements, we can specify the appropriate valve for your application.
SOLENOID VALVES FOR RESTAURANTS &
Check us out at www.gcvalves.com. You’ll find
valves for Air and Inert Gases, Water, Cryogenics, Steam,
Hot Water and Potable Water.
We design and manufacture valves for:
… and much, much more.
And don’t forget to ask your Region Office about our
offerings for High Pressure gases and liquids up to 2200 psi.
SOLENOID VALVE ELECTRICAL INFORMATION
SENSIBLE PRECAUTIONS FOR ELECTRICAL & CONTROL
Solenoid valves can be economical solutions to flow control requirements. And they are easy to maintain. But any electro-mechanical device has limitations.
Here are a few choices that might add to your comfort level when applying solenoid valves:
1 -- specify DIN coils and connectors to simplify assembly and reduce installation time
2 -- investigate the use of rectified coils if "ac hum" is a concern, especially in residential installations
3-- consider DIN electrical connectors with integral surge suppression to protect control electronics
4 -- use lighted DIN connectors to simplify troubleshooting
5 -- evaluate magnetic latching coils for battery operation or when heat generated by the solenoid valve coil is a concern.
And be sure to ask your distributor or region manager about the availability of manual override if valve operation is required when power is interrupted.
GC VALVES HOUSING OPTIONS
Solenoid valve coils and housings offer a variety
of options for electrical connections. In addition to lead wires, CFA and GC Valves offer:
We even have 120vac cords with standard 2-prong or 3-prong wall plugs. 240 volt, too.
ELECTRICAL HOUSING CODES
Here are the GC Valves Housing
Codes (position 5 in the part number)
36” and 48” leads are also available.
EXPLOSION PROOF HOUSINGS
Most solenoid valves from GC Valves are available with explosion proof housings: they are rated NEMA 7, Class I, Groups C & D; Class II, Groups E, F, & G, Division 1 and 2.
These classifications refer to explosive mixtures that may be in the atmosphere around the valve, not the gases etc. that flow through the valve. The explosion proof housing is designed to prevent an explosion of dust or gases in the atmosphere outside of the valve.
GC VALVES COLOR CODES FOR INTEGRAL COIL/HOUSINGS WITH LEADS
01 - 24 V 60Hz -- BLACK / GREEN / BLACK
02 - 110V 50 Hz / 120V 60 Hz -- RED / GREEN / RED
03 - 208V 60Hz -- BLUE / GREEN / BLUE
04 - 220V 50Hz / 240V 60Hz -- ORANGE / GREEN / ORANGE
07 - 440 V 50Hz / 480 V 60Hz -- BLACK / GREEN / BLACK
24 - 24 V 50/60 Hz -- YELLOW / GREEN / YELLOW
14- 6 VDC -- BLUE / GREEN / BLACK
15 - 12 VDC -- RED /GREEN / BLACK
16 - 24 VDC -- YELLOW / GREEN / BLACK
17 - 32 VDC -- BLACK / GREEN / BLACK
Other voltages available with separate coils and metallic housings:
06 - 5 VDC
13 - 500 V 50Hz / 550 V 60Hz
18 - 120 VDC
19 - 240 VDC
25 - 100 VDC
30 - 480 VDC
33 - 48 VDC
37 - 64 VDC
54 - 240 V 50Hz
55 - 380V 50Hz
66 - 12 V 60Hz
74 - 74 VDC
88 - 100 V 50/60Hz
89 - 101 V 50Hz
90 - 101 V 60Hz
91 - 202 V 50Hz
92 - 202 V 60Hz
94 - 200 V 50/60Hz
GC VALVES INCREASES
FLEXIBILITY IN 24VAC SOLENOID VALVES
Responding to customer requests, GC Valves has standardized on a more widely applicable 24vac coil design.
24vac valves using S3 and S4 coils are now shipping with voltage code “24”: 24V/60HZ 24V/50HZ. For no difference in operating pressures, the “24” coil cuts inventory requirements for companies that provide products to both 60HZ and 50HZ countries.
The S3 and S4 coils are used on S20, S21, S30, S31, S33, and S40 solenoid valves (and related “H” or “NS” versions)
with all housings. Voltage code “01” coils (24V 60HZ) that were replaced by the “24” are still available as a special order.
SHADING RINGS FOR AC VOLTAGES
Solenoid valves that operate on AC power required a non-magnetic element in the plunger head. We typically build brass and Noryl bodied valves with copper shading rings; stainless steel valves normally have a silver shading ring. The shading ring is intended to prevent the buzz or chatter caused by the zero voltage cross-over point in the AC cycle. DC voltage solenoid valves do not require the shading ring, which is why the entire operator must be replaced when changing a DC valve over to AC power.
DIN LIGHTED CONNECTORS
Most of our solenoid valves can be built with “International tab” or DIN coils. This world-wide standard allows many options for wiring and built-in electronics. Among the most popular is the lighted connector which incorporates an LED to indicate that power is supplied to the DIN connector. It can be a valuable tool during factory test, field installation, and trouble-shooting.
SOLENOID VALVE DESIGN & OPERATION
OUTSTANDING 3-WAY SOLENOID VALVE PERFORMANCE
Direct Acting 3-way solenoid valves from GC Valves feature a special compensating top seal that yields longer life and dependable performance. This exclusive seal is metal-supported to off-set damage that may be caused by pressure and temperature. Because it floats, stress and warping are eliminated and a proper seal is assured.
- our S33 "all ports in the body" design means that fluid lines do not need to be disconnected to change out coils or repair internal parts
- S20 3-way valves offer uncommonly high flows in a 3-way brass body
- M20 & M21 piloted diaphragm valves for liquids and gases have high flow 3/4" orifices (including 0 pressure differential operation) not found in most other manufacturer's 3-way offerings
- Custom offerings include "HIFlo-LoFlo" valves, manifolded, and many other options for most line fluids.
Contact your distributor or the Region Office to learn more.
SENSIBLE PRECAUTIONS FOR SOLENOID VALVE USERS
Solenoid valves are your fastest acting option when controlling flow, they can be repaired in-line (without breaking plumbing connections in most designs), and they can be less costly than other electrically operated valves.
But there are a few measures that can increase your satisfaction with solenoid valves:
1 -- install strainers or filters to prevent foreign materials from entering the valve and interfering with operation
2 – avoid teflon tape: those stringy leftover pieces can travel downstream and hang up in the valve
3 – use pipe dope sparingly: globs of it in the line can affect solenoid valves and other control elements
4 -- add check valves if it is important to prevent back flow through the solenoid valve
5 -- plumb solenoid valves in series (double-block) when leakage is unacceptable
6 -- add manual override to allow operation when power is off
7 -- ask for a plated operator to protect special grades of stainless steel from corrosion.
And be sure to let you distributor or region manager know about everything in the line fluid: additives in air, water or other fluids can change the soft-seal requirements.
SLOW CLOSING VALVES
GC Valves offers slow closing designs in the most common sizes. Choose our “4” brass body to help reduce water hammer in 3/8” through 2” NPT. Stainless Steel versions are also available in the larger pipe sizes.
ZERO PRESSURE DIFFERENTIAL DESIGNS
Many GC Valves solenoid valve designs are intended for tower and tank drains, closed loop systems and other low pressure applications where there may be little or no pressure differential to assist the valve in fully opening.
You can access data sheets at www.gcvalves.com or contact me at the Northeast Region Office.
SOLENOID VALVE MANIFOLDS
GC Valves designs and manufactures standard and custom manifolds that incorporate solenoid valve operators. They are typically used to dispense a gas or liquid to several outlets – or to choose from several line fluids and
supply them to a single user. 2- and 3-way versions are available from 1/8” to ¾” NPT in stainless steel, aluminum, brass and man-made materials. Washing applications, sampling instrumentation, “feed and drain” operations, and many others use these products.
+ ENGINEERING VISION
= AFFORDABLE SOLUTIONS
Can’t find what you want in a catalog? We’ll combine
off-the-shelf parts with innovative designs to meet your needs. Unique products for your pressure, temperature, flow. Materials for special line fluids and corrosion resistance. Combo-assemblies, manifolds, custom flow patterns and much more. Contact the region office.
FFKM: SOLENOID VALVES WITH PERFLOURELASTOMER SEALS
FFKM seals have excellent resistance to high temperatures and chemicals. They are commonly used in
applications that involve contact with highly corrosive line fluids, or when high process temperatures are encountered. We offer them in Direct Acting S30 and S31
Series. Further information is available in the Application Guides on www.gcvalves.com.
GC Valves is offering flanged solenoid valves for applications up to 6” pipe. Cast iron is typically used in water applications. A limited range of stainless steel and steam valves are available. Contact the region office to submit your application for engineering review.
To join the "Solenoid Valve Info" email list or order your copy of the GC Valves catalog, simply submit the Contact form or email firstname.lastname@example.org. You can also suggest a TECHTIP and if we use it you will receive a GC Valves coffee mug filled with candy!
And you can view our Product Overview on-line by clicking below:
Solenoid Valve News, Tips, FAQs
CURRENT FAQ: Do your valves meet the ARRA "Buy American Provision"?
Yes, solenoid valves, solenoid valve manifolds, and solenoid valve assemblies manufactured by GC Valves and Components For Automation Inc. comply with the requirements of the Buy American Provision in the American Recovery & Reinvestment Act. These valves also carry UL and CE listings. And many carry CSA, too.
NOTE: We do re-sell some products manufactured by our affiliates that do not comply. Ask your region manager if in doubt.
NOT IN THE NORTHEAST US OR EASTERN CANADA?
Find your region office at: